
120T Plastic Injection Moulding Machine
The ARLEX AX120 is a 1200 kN injection moulding machine designed for manufacturers producing a wide range of plastic components. With multiple screw configuration options and a flexible machine setup, it can be configured to meet different material, shot-size and moulding requirements.
From everyday consumer products to selected industrial components, the AX120 provides a practical platform for stable, repeatable production when correctly matched to the part and mould.
Ningbo Yalishi(Arlex) Plastic Machinery Co., Ltd. is one of the leading manufacturers and suppliers of 120t plastic injection moulding machine in China. Please feel free to wholesale advanced 120t plastic injection moulding machine made in China here from our factory.
A Flexible 120T Injection Moulding Solution
Different plastic products require different combinations of injection capacity, mould dimensions, clamping force and processing conditions. The ARLEX AX120 offers three screw diameter options, allowing the injection unit to be matched more closely to the required shot size and material.
With a rated clamping force of 1200 kN, the AX120 is intended for production applications whose mould and projected part area fall within the machine's operating capability.
Before selecting a configuration, manufacturers should evaluate the part weight, resin grade, mould dimensions, cavity layout and target cycle time.
Product Overview
Machine model
ARLEX AX120
Clamping force
1200 kN
Screw diameter options
35 / 38 / 42 mm
Listed PS injection weight
150 / 179 / 217 g
Machine type
General-purpose injection moulding machine
The AX120 can be configured for different production requirements. Actual suitability depends on the selected screw, material characteristics, mould design and required production cycle.
Key Machine Features
Clamping Unit
The clamping unit provides the force required to keep the mould closed during injection. Correct clamping force selection helps maintain mould stability and reduce the risk of flash when the machine is properly matched to the application.
The mould dimensions, tie-bar spacing, mould height and required opening stroke should be checked before confirming machine compatibility.
01
Injection Unit
The injection unit plasticizes the selected thermoplastic material and injects the melt into the mould. The AX120 offers three screw diameter options to accommodate different shot-size and processing requirements.
Screw and barrel configurations should be selected according to the resin grade, required shot size, wear characteristics and processing conditions.
02
Servo-Hydraulic Drive System
The servo-hydraulic system adjusts power output according to the machine's operating demands. Potential energy savings depend on the machine configuration, moulding cycle, resin, process settings and production conditions.
For an accurate energy comparison, evaluate measured consumption under comparable operating conditions.
03
Control System
The control system allows operators to set and monitor the main moulding parameters, including injection, holding pressure, temperature and cycle settings, according to the installed controller's functions.
Controller brand, recipe capacity, communication interfaces and automation functions should be confirmed for the actual order.
04
Appliaction
Application suitability depends on part dimensions, projected area, material, shot size, mould design and the required production cycle. The examples above are not a guarantee that every listed product can be produced on every AX120 configuration.

Packaging Industry
• food containers
• caps
• thin-wall boxes

Household Products
• storage boxes
• baskets
• chairs small parts

Electrical Components
• housings
• connectors

Automotive Parts
• interior parts
• Clips

Industrial Components
• engineering plastic parts

Daily Products
• cosmetic packaging
Screw Configuration
Choose the Right Screw Configuration for Your Production
The AX120 is listed with three screw diameter options. A larger screw generally provides a greater theoretical shot volume, while a smaller screw may offer higher injection pressure within the listed configurations. The final choice should be based on the material and moulding process, not screw diameter alone.
AX120-A - 35 mm Screw
Theoretical shot volume: 165 cm³
Listed PS injection weight: 150 g
Listed injection rate: 85 g/s
Listed injection pressure: 219 MPa
A configuration to evaluate when the required shot size is relatively moderate and the application benefits from the higher listed injection pressure.
AX120-B - 38 mm Screw
Theoretical shot volume: 197 cm³
Listed PS injection weight: 179 g
Listed injection rate: 101 g/s
Listed injection pressure: 186 MPa
A middle configuration offering a balance between the listed shot volume, injection rate and injection pressure.
AX120-C - 42 mm Screw
Theoretical shot volume: 238 cm³
Listed PS injection weight: 217 g
Listed injection rate: 123 g/s
Listed injection pressure: 152 MPa
A configuration to evaluate when a greater shot volume and injection rate are required, provided the material and moulding process are compatible.
Selection note: The listed injection weights are reference values for PS. Actual usable shot size and part weight depend on the resin, process settings, runner system and required process stability.
Technical Specifications
AX120 Technical Parameters
| Parameter | AX120-A | AX120-B | AX120-C |
| Screw Diameter | 35 mm | 38 mm | 42 mm |
| Screw L/D Ratio | 22 | 20 | 18.1 |
| Theoretical Shot Volume | 165 cm3 | 197 cm3 | 238 cm3 |
| Injection Weight (PS) | 150 g | 179 g | 217 g |
| Injection Rate | 85 g/s | 101 g/s | 123 g/s |
| Plasticizing Capacity | 13 | 15 | 17 |
| Injection Pressure | 219 Mpa | 186 Mpa | 152 Mpa |
| Common Machine Parameter | Listed Specification | ||
| Clamping Force | 1200 kN | ||
| Screw Speed | 0–215 rpm | ||
| Toggle Stroke | 350 mm | ||
| Space Between Tie Bars | 380*380 mm | ||
| Maximum Mould Height | 400 mm | ||
| Minimum Mould Height | 155 mm | ||
Specifications reproduced from the current AX120 product page. Confirm all figures, units and configuration details with the factory before publication or quotation.
Why Choose ARLEX AX120?
A Practical Choice for Flexible Production
Multiple Screw Options
Three listed screw diameters help manufacturers match injection capacity to the part and material requirements.
Application-Based Configuration
Machine selection can take into account the part weight, resin, mould dimensions and required cycle time.
Production-Focused Machine Design
The clamping, injection and drive systems should be evaluated together to ensure the selected machine fits the intended process.
Technical Support for Machine Selection
Provide your part and mould details so the ARLEX team can assess the required clamping force, shot size and machine configuration.
How to Select the Right 120T Injection Moulding Machine
Check These Requirements Before Ordering
Product Weight and Shot Size
Calculate the total shot requirement, including the runner system where applicable. Compare it with the suitable usable shot capacity for the selected resin.


Plastic Material
Identify the resin grade and any special processing requirements. Material choice can affect screw and barrel selection, injection pressure and processing temperature.
Mould Dimensions
Check the mould width, height, tie-bar clearance, opening stroke and installation requirements against the machine specifications.


Required Clamping Force
Evaluate the projected area of the moulded parts and runner system, together with the material and process requirements, to determine whether 1200 kN is sufficient.
Production Cycle and Automation
Confirm the target cycle time, ejection requirements, part-removal method and any robot or auxiliary equipment interfaces.

Need help choosing? Send ARLEX your product drawings, material grade, part weight and mould dimensions for a technical assessment.
Machine Details
Clamping Unit
Closes and holds the mold during injection.
Injection Unit
Melts and injects the plastic material into the mold.
Control System
Supports the setting and monitoring of molding parameters.
Servo and Hydraulic System
Drive and hydraulic components depend on the supplied machine configuration.
Factory, Testing and Quality Control
From Assembly to Pre-Delivery Inspection
Before shipment, the machine should be inspected according to the factory's applicable quality-control procedures. Relevant checks may include machine movement, clamping operation, injection functions, temperature control, safety devices and controller operation.
Where agreed with the customer, a mould trial and sample inspection can help confirm the machine's suitability for the intended application before shipment.
Configuration and Automation Options
Configure the Machine for Your Production Needs
Depending on the machine specification and project requirements, the quotation can address screw and barrel configuration, controller options, hydraulic configuration, auxiliary equipment and automation interfaces.
The availability of each option should be confirmed for the AX120 model before it is presented as a standard feature.
FAQ
Is the ARLEX AX120 suitable for different plastic materials?
+
-
The machine may be configured for different thermoplastics, subject to the screw and barrel configuration, material characteristics and processing requirements. Confirm suitability for the specific resin grade before ordering.
How do I choose between the 35 mm, 38 mm and 42 mm screws?
+
-
Compare the required shot size, material, injection pressure, injection rate and product quality requirements. The largest screw is not automatically the best choice for every application.
Is 1200 kN clamping force sufficient for my mould?
+
-
That depends on the projected area, material, cavity pressure, mould design and process conditions. Share the mould drawings and product details so the required clamping force can be assessed.
Can the AX120 be supplied with a robot or auxiliary equipment?
+
-
Automation and auxiliary equipment requirements should be discussed during quotation. Compatibility and interface details depend on the selected configuration.
What information should I provide to request a quotation?
+
-
Please provide the plastic material, part weight, product dimensions, mould dimensions, cavity count, target cycle time and automation requirements. Product drawings or photographs are also helpful.
Download Brochure
Need More Technical Information?
Request the AX120 technical brochure or contact ARLEX for the latest machine specifications and available configurations.
Hot Tags: 120t plastic injection moulding machine, China 120t plastic injection moulding machine manufacturers, suppliers, factory, hydraulic injection molding machine, large hydraulic molding press, high output injection molding machine, servo injection moulding machine, heavy duty injection molding machine, 1680T Plastic Injection Moulding Machine
You Might Also Like
Send Inquiry




























