ARLEX · Technology Center · How to Select · 04

How to Choose the Right Injection Screw and Barrel

The screw and barrel are among the most important components of an injection moulding machine. They directly affect plasticising performance, melt quality, injection stability, and component wear.

Different plastics have different processing characteristics. General-purpose materials such as PP and PE may require different screw configurations from engineering plastics such as PA, PC, PBT, and glass-fibre-reinforced materials.

Choosing the wrong screw and barrel configuration can lead to inconsistent plasticising, unstable injection, excessive wear, material degradation, or unnecessary maintenance costs.

This guide explains how to select the appropriate injection screw and barrel based on material properties, screw design, wear resistance, and production requirements.

1. Understand the Functions of the Screw and Barrel

The screw and barrel work together to transform plastic pellets into a homogeneous molten material and deliver it into the mould.

The screw performs three main functions:

Feeding

Plastic pellets enter through the hopper and move forward along the screw channel.

Plasticising and Melting

The rotating screw transports, compresses, heats, and melts the plastic through a combination of mechanical shear and external barrel heating.

Injection

The screw moves forward to inject the prepared melt into the mould under controlled pressure and speed.

The barrel houses the screw and provides the heated processing chamber. The clearance between the screw and barrel, their surface condition, and their wear resistance all influence machine performance.

A suitable screw and barrel configuration should match the material, required shot size, injection performance, and expected production conditions.

2. Choose the Screw Design According to the Plastic Material

Different materials require different plasticising conditions. Screw geometry should therefore be selected according to resin properties rather than using one configuration for every application.

General-Purpose Screw

General-purpose screws are designed to process commonly used thermoplastics under a broad range of production conditions.

Typical materials include:

  • PP (Polypropylene)
  • PE (Polyethylene)
  • PS (Polystyrene)
  • ABS (Acrylonitrile Butadiene Styrene)

They are commonly used for household products, packaging components, general plastic parts, and other applications using standard thermoplastics.

General-Purpose Screw

Screw for Engineering Plastics

Engineering plastics may require more controlled plasticising conditions because of their processing temperatures, viscosity, moisture sensitivity, and thermal characteristics.

Common materials include:

  • PA (Polyamide)
  • PC (Polycarbonate)
  • PBT (Polybutylene Terephthalate)
  • POM (Polyoxymethylene)
  • PMMA (Polymethyl Methacrylate)

The screw design should be evaluated according to the actual resin grade, melt temperature, required injection performance, and processing window.

Screw for Glass-Fibre-Reinforced Materials

Glass-fibre-reinforced materials can cause increased abrasive wear on screw flights, the barrel, and other melt-contact components.

Typical materials include:

  • PA66 GF
  • PA6 GF
  • PBT GF
  • PP GF
  • Other glass-fibre-reinforced engineering plastics

When processing these materials, screw and barrel wear resistance should receive particular attention. The screw material, surface treatment, and barrel lining should be selected according to glass-fibre content, operating conditions, and expected production volume.

Screw for PET and Other Special Materials

PET Screw and Flange

PET and other special-purpose materials may require dedicated screw geometry and processing arrangements.

For PET applications, important considerations include:

  • Material drying and moisture control
  • Screw compression and plasticising design
  • Melt temperature stability
  • Residence time
  • Injection volume and plasticising capacity

For other materials such as PVC, PMMA, and PPS, screw design and material compatibility should also be evaluated individually. A general-purpose screw should not automatically be assumed suitable for every resin.

3. Understand Different Screw and Barrel Material Options

Screw and barrel material selection affects wear resistance, corrosion resistance, service life, and maintenance requirements.

The terms used by suppliers can vary, so the actual base material, alloy composition, heat treatment, coating, and hardfacing process should be confirmed before comparing quotations.

Standard Nitrided Screw and Barrel

Nitrided screw and barrel components use surface hardening treatment to improve surface hardness and wear resistance.

Typical characteristics:

  • Suitable for many standard thermoplastic applications
  • Improved surface hardness compared with untreated steel
  • Commonly used for general-purpose production
  • Cost-effective for conventional processing requirements

The suitability of nitrided components depends on the resin, additives, operating conditions, and required service life.

Standard Nitrided Screw and Barrel

Alloy Screw and Barrel

Alloy Screw and Barrel

Alloy steel components are manufactured using selected alloy steel grades and suitable heat-treatment processes.

Typical characteristics:

  • Material properties can be tailored to the application
  • Suitable for different levels of mechanical and thermal loading
  • Performance depends on the alloy composition and manufacturing process
  • Can be specified for more demanding production requirements

The term "alloy screw" alone does not define a specific wear-resistance level. Buyers should request the actual material grade and treatment details.

Bimetallic Screw and Barrel

Bimetallic designs use different materials in selected working areas to improve resistance to wear or corrosion. Depending on the manufacturer and design, a wear-resistant alloy layer may be applied to screw flights or a barrel liner may be manufactured from a different alloy.

Typical characteristics:

  • Improved resistance to abrasive wear in suitable applications
  • Can be specified for glass-fibre-reinforced and filled materials
  • May extend service life under demanding processing conditions
  • Higher initial cost than many standard configurations

The actual performance depends on the alloy composition, layer thickness, bonding quality, processing conditions, and material being processed.

Bimetallic Screw and Barrel

Electroplated Screw

Electroplated Screw

Electroplating applies a metallic surface coating to a component to provide specific surface properties.

Depending on the plating material and process, potential benefits may include:

  • Improved surface hardness
  • Reduced surface friction
  • Improved corrosion resistance
  • Easier cleaning and maintenance in suitable applications

Electroplating is a surface treatment, not the same construction method as a bimetallic screw. Its suitability depends on the coating material, thickness, adhesion, and the wear mechanism involved. It should not be assumed that an electroplated screw is automatically suitable for highly abrasive glass-fibre-reinforced materials.

Comparison of Common Options

Configuration Main characteristic Typical consideration
Nitrided Surface-hardened steel General-purpose production
Alloy steel Selected alloy composition and heat treatment Application-specific strength and wear requirements
Bimetallic Different wear-resistant materials in working areas Abrasive or demanding materials
Electroplated Metallic surface coating Surface and corrosion requirements, depending on coating

Important: These descriptions are general categories, not universal material specifications. Actual performance should be compared using confirmed material grades, treatment specifications, and application tests.

4. Select the Appropriate Screw Diameter and L/D Ratio

Screw diameter and L/D ratio are important factors in injection and plasticising performance.

Screw Diameter

Screw diameter affects the available injection volume, injection characteristics, and plasticising capacity. When selecting a screw diameter, consider:

  • Required shot size
  • Component and runner weight
  • Number of cavities
  • Required injection pressure
  • Required injection speed
  • Material characteristics
  • Plasticising recovery time

A larger screw does not necessarily provide better production performance. It should be matched to the required shot size and injection conditions.

Measuring Screw Diameter

L/D Ratio

L/D ratio refers to the ratio between the effective screw length and its nominal diameter.

L/D = Screw Length / Screw Diameter

The L/D ratio influences the available length for conveying, melting, mixing, and homogenising the material. The appropriate ratio depends on screw design, resin properties, and processing requirements. A higher L/D ratio does not automatically mean better plasticising performance.

Compression Ratio

Compression ratio is generally defined by comparing the channel depth in the feeding section with that in the metering section. It influences how the material is compressed and processed along the screw.

Different resins require different screw geometries and compression characteristics. The screw should be designed for the target material rather than selected by compression ratio alone.

5. Consider Special Screw Designs and Mixing Requirements

Special Screw Designs

Some applications require more specialised screw structures to improve melting, mixing, or material consistency.

Depending on the processing requirements, designs may include:

  • Barrier screw: Separates solid and molten material flow in parts of the screw to support melting performance.
  • Mixing screw: Uses specialised mixing sections to improve melt homogeneity and additive dispersion.
  • Low-shear screw: Designed to reduce excessive shear heating for suitable heat-sensitive materials.
  • Material-specific screw: Designed around the processing characteristics of a particular resin or material family.

Special screw designs should be evaluated based on actual processing results. They are not automatically required for every precision or high-output application.

6. Match the Screw and Barrel to Your Production Application

The correct configuration depends on the product, material, and production conditions.

Application Typical material considerations Screw and barrel considerations
General plastic products PP, PE, ABS, PS General-purpose configuration
PET preforms PET PET-specific plasticising design and moisture control
Optical components PMMA, PC, other optical-grade resins Material compatibility and melt quality
Automotive components PP, PA, ABS, PC/ABS, reinforced grades Depends on resin, reinforcement, and component requirements
Electrical components PA, PBT, PC/ABS, LCP Material-specific processing and wear requirements
Thin-wall packaging PP, PS, PET, depending on product Injection speed, shot size, and plasticising recovery
Glass-fibre-reinforced parts PA GF, PBT GF, PP GF Enhanced wear resistance may be required

The material grade and additives should always be confirmed before finalising the screw and barrel specification.

7. Common Mistakes When Choosing a Screw and Barrel

Choosing Only by Machine Tonnage

Clamping force does not determine the correct screw and barrel configuration. Two machines with the same clamping force may have different injection units and screw specifications.

Using One Screw for Every Material

Different materials have different melting, flow, thermal, and wear characteristics. A screw suitable for PP may not be suitable for PET or glass-fibre-reinforced PA.

Assuming Bimetallic Is Always Better

Bimetallic components can offer advantages in abrasive applications, but their benefits depend on material composition and actual operating conditions. They may not be necessary for standard production.

Ignoring Material Drying and Processing Conditions

Some engineering plastics are sensitive to moisture and thermal degradation. Screw selection alone cannot compensate for incorrect drying, temperature settings, or excessive residence time.

Comparing Prices Without Checking Specifications

Two suppliers may use the same description, such as "alloy screw" or "bimetallic screw", while offering different materials and manufacturing processes. Before comparing prices, confirm the base material, treatment method, alloy composition, coating or layer specifications, and intended application.

8. What Information Is Needed to Select the Right Screw and Barrel?

To recommend a suitable screw and barrel configuration, the following information should be prepared:

Material information

  • Resin name and grade
  • Virgin or recycled material
  • Glass-fibre or mineral-filler content
  • Flame-retardant or other additives
  • Processing temperature and drying requirements

Production information

  • Product type and application
  • Product and runner weight
  • Required shot size
  • Production cycle target
  • Expected operating hours

Machine information

  • Machine model and clamping force
  • Existing screw diameter
  • Screw L/D ratio, if available
  • Current screw and barrel material
  • Existing processing problems, if any

For replacement projects, photographs of the existing screw and barrel, together with dimensions and identification numbers, can help confirm compatibility.

ARLEX Screw and Barrel Configuration Recommendations

ARLEX evaluates screw and barrel configurations according to the selected injection unit, resin characteristics, product requirements, and production conditions.

Our recommendation process considers:

Resin type and material formulation
Required screw diameter and injection capacity
Screw geometry and plasticising requirements
Wear and corrosion resistance
Barrel and screw material compatibility
Production volume and expected service life

Whether you are configuring a new injection moulding machine or replacing an existing screw and barrel, the objective is to achieve a suitable balance between processing performance, component durability, and operating cost.

ARLEX Screw Measurement & Evaluation

Frequently Asked Questions

1. What is the difference between an alloy screw and a bimetallic screw?

An alloy screw is generally made from a selected alloy steel and processed through suitable heat treatment. A bimetallic screw uses different materials in selected working areas, often with a wear-resistant alloy layer on the screw flights. The exact construction depends on the manufacturer.

2. Is a bimetallic screw necessary for glass-fibre-reinforced plastics?

Not in every case, but enhanced wear resistance is often worth evaluating. The appropriate configuration depends on glass-fibre content, resin type, production volume, and expected service life.

3. Is an electroplated screw suitable for all plastics?

No. Electroplating provides specific surface properties, but suitability depends on the coating material, adhesion, thickness, and processing conditions. It should not be treated as a universal solution for abrasive or corrosive materials.

4. Can one screw process different plastic materials?

Some screws can process several compatible materials, but not every resin can be processed effectively using the same screw design. Material changes should be evaluated for temperature, viscosity, thermal stability, and cleaning requirements.

5. When should a screw and barrel be replaced?

Possible signs of wear include reduced plasticising performance, unstable injection, longer recovery time, inconsistent shot weight, and increased material leakage. These symptoms can also have other causes, so screw and barrel wear should be confirmed through inspection and measurement before replacement.

Discuss Your Screw & Barrel Requirements with ARLEX

Contact ARLEX with your material and production requirements to discuss a suitable screw and barrel configuration.

Get a Configuration Recommendation

 

Related Guides

Explore more technical guides for injection moulding machine selection.

Guide 01
How to Choose the Right Injection Moulding Machine
Read Guide →
Guide 02
How to Calculate the Required Clamping Force
Read Guide →
Guide 03
How to Choose Injection Capacity and Screw Diameter
Read Guide →
Guide 05
How to Check Mould and Machine Compatibility
Read Guide →

whatsapp

Phone

E-mail

Inquiry