408T Fruit Crate Plastic Injection Moulding Machine

408T Fruit Crate Plastic Injection Moulding Machine

408T Fruit Crate Injection Molding Machine
AX408 Fruit Crate Injection Molding Machine for Stable and Efficient Crate Production
Send Inquiry
Product Introduction

Ningbo Yalishi(Arlex) Plastic Machinery Co., Ltd. is one of the leading manufacturers and suppliers of 408t fruit crate plastic injection moulding machine in China. Please feel free to wholesale advanced 408t fruit crate plastic injection moulding machine made in China here from our factory.

 

AX408 Fruit Crate Injection Molding Machine for Stable and Efficient Crate Production

 

Built for Demanding Fruit Crate Production
The ARLEX AX408 Fruit Crate Injection Molding Machine is developed for the production of plastic fruit and vegetable crates, storage baskets and other large structural containers.
With a 4080 kN clamping force, 90 mm injection screw and high-capacity injection unit, the AX408 provides the injection performance required for large crate molds and continuous production. Its rigid clamping structure, stable hydraulic system and reinforced ejection system are designed to support reliable molding of ribbed and deep-cavity crate products.

4080 kN

Clamping Force

90 mm

Screw Diameter

2052 g

Injection Weight

592 g/s

Injection Rate

Fruit Crate Injection Molding Machine

Machine Type

Request a Quote

 

Product Overview

 

Injection Molding for Large and Structural Plastic Crates

Fruit crate production places different demands on an injection molding machine compared with conventional household plastic products. Large projected areas, deep cavities, dense ribs and relatively high shot weights require sufficient clamping force, injection capacity and ejection performance.
The AX408 combines 4080 kN of clamping force with a 90 mm injection screw, providing a theoretical shot size of 2256 cm³, an injection weight of up to 2052 g and an injection rate of 592 g/s.
The machine can be configured according to crate dimensions, product weight, mold design, material and required production output

 
Designed for Different PET Preform Requirements
 
01/

Large Crate Dimensions

Large fruit crates require sufficient clamping capacity and mold installation space to support their projected area and overall dimensions.

02/

Ribbed & Deep-Cavity Structures

Dense ribs and deep cavities can increase filling resistance and make part ejection more demanding, requiring stable injection and adequate ejection performance.

03/

High Shot Weight

Larger crates require greater material volume per molding cycle. The AX408 provides an injection weight of up to 2052 g based on PS material.

04/

Recycled Material Processing

Fruit crates are commonly produced using PP or recycled plastic materials. The injection system can be configured according to the material and processing requirements.

05/

Continuous Production

A rigid machine structure and stable hydraulic control support repeated molding cycles for high-volume crate production.

 

Applications
 
 

Applications of the AX408 Fruit Crate Plastic Injection Molding Machine

Agricultural Fruit Crates

Agricultural Fruit Crates

For ventilated crates used to collect, transport and store fruits and vegetables.

Vegetable Produce Crates

Vegetable & Produce Crates

Suitable for reusable plastic crates used in agricultural produce handling and distribution.

Stackable Storage Crates

Stackable Storage Crates

For durable stackable containers used in warehouses, markets and distribution facilities.

Logistics Transport Totes

Logistics & Transport Totes

Suitable for reusable plastic containers used in material handling and logistics operations.

Heavy-Duty Plastic Baskets

Heavy-Duty Plastic Baskets

For rigid plastic baskets requiring high strength, structural stability and repeated use.

 

Why Choose AX408 Fruit Crate Injection Molding Machine?

 

icon

High Clamping Capacity

The 4080 kN clamping force provides stable mold support for large fruit crate molds and products with large projected areas.

01

icon

High-Capacity Injection Unit

The 90 mm screw provides a 2256 cm³ theoretical shot size and supports injection weights of up to 2052 g.

02

icon

Fast Injection Performance

With an injection rate of up to 592 g/s, the AX408 provides the filling capacity required for large crate molds.

03

icon

Stable Molding of Ribbed Structures

Controlled injection and hydraulic performance help maintain consistent filling of crates with complex rib patterns and deep cavities.

04

icon

Designed for Continuous Production

The rigid machine structure and stable process control support repeated molding cycles in high-volume crate production.

05

 

Technical Specifications

 

AX408-Fruit Crate Technical Specifications

Model AX408-Fruit Crate
Screw Diameter 90 mm
Shot Size(Theoretical) 2256 cm3
Injection Weight(PS) 2052 g
Injection Rate 592 g/s
plasticizing capacity 62 g/s
Injection Pressure 120 Mpa
Screw Speed 0-165 rpm
Clamp Tonnage 4080 KN
Toggle Stroke 720 mm
Space Between Tie Bars 730*730 mm
Max Mold Height 750 mm
Min Mold Height 250 mm

 

Screw Configuration

 

90 mm Screw for Fruit Crate Production
The AX408 Fruit Crate uses a 90 mm injection screw configuration designed to provide the shot capacity and injection performance required for large plastic crate production.

90 mm

Screw Diameter

2256 cm³

Shot Size

2052 g

Injection Weight

592 g/s

Injection Rate

120 MPa

Injection Pressure

product-783-522
product-783-522

product-800-432

 

How to Select the Right Fruit Crate Injection Molding Machine

 

1

Crate Dimensions: Start with the length, width and height of the finished crate to determine the required mold and machine size.

2

Crate Weight: Product weight helps determine the required shot capacity and injection unit configuration.

3

Projected Area: The projected area of the crate is an important factor when determining the required clamping force.

4

Mold Dimensions: Check mold dimensions, tie-bar spacing, mold height and mold weight to ensure proper installation on the machine.

5

Material: Specify the resin being used, such as virgin PP, recycled PP or HDPE, together with the required processing conditions.

6

Target Output: Define the required production quantity and cycle time to determine the machine capacity and production configuration.

Send us your preform drawing, weight, cavity number and target output for a recommended machine configuration.

 

Machine Details

 
Clamping Unit
Injection Unit
Control System
Ejection System
Hydraulic System
 
 

Clamping Unit

The high-rigidity clamping structure provides stable mold support during high-load molding and helps maintain consistent mold positioning throughout repeated production cycles.

Injection System

The high-capacity injection unit provides the injection volume and speed required to fill large crate molds with ribbed and structural features.

Control System

The control system manages injection, pressure, temperature, clamping and ejection parameters for repeatable crate production.

Ejection System

Reinforced ejection performance helps release large crates with deep cavities and dense rib structures while reducing the risk of deformation during demolding.

Hydraulic System

The optimized hydraulic system provides responsive control of clamping, injection and mold movement while maintaining stable pressure during production.

 

Factory / Production

 

AX408 Fruit Crate Machine in Production

See the AX408 in operation, from plasticizing and injection to crate ejection and finished product handling.

 

Customization

Configure the Machine for Your Crate Production

Fruit crate production requirements vary according to product dimensions, weight, mold design, material and target output. ARLEX can configure the machine according to the actual production conditions.

 

Configuration Factors

Screw diameter

Screw and barrel configuration

Injection pressure

Injection speed

Hydraulic system

Control system

Voltage and frequency

Auxiliary equipment

Automation requirements

Tell Us Your Product Requirements

 

FAQ
 
 

What products can the AX408 Fruit Crate Injection Molding Machine produce?

+

-

The AX408 is designed for plastic fruit and vegetable crates, produce baskets, stackable storage crates and other large reusable plastic containers.

What is the clamping force of the AX408 Fruit Crate Machine?

+

-

The AX408 provides 4080 kN of clamping force.

What screw diameter does the AX408 Fruit Crate Machine use?

+

-

The AX408 Fruit Crate configuration uses a 90 mm injection screw.

What is the maximum injection weight?

+

-

The AX408 provides an injection weight of up to 2052 g based on PS material.

Can the AX408 process recycled PP?

+

-

The machine can be configured for applications using virgin or recycled plastic materials. The appropriate screw and processing configuration should be selected according to the actual material characteristics.

How do I determine the required machine tonnage for my fruit crate?

+

-

Machine selection depends on the crate's projected area, product weight, mold design, material, cavity number and required production cycle. Providing the crate drawing and mold information allows ARLEX to evaluate the required clamping force.

Can the AX408 run different sizes of fruit crates?

+

-

Different crate molds can be used when their dimensions, weight and production requirements fall within the machine's clamping, injection and mold installation capabilities.

Can automation be added to the fruit crate production line?

+

-

Yes. Automation such as servo robots, conveyors and material regrinding systems can be configured according to the production process and factory requirements.

 

Download Brochure

 

Download AX408 Fruit Crate Machine Brochure

Get detailed technical specifications, machine dimensions and configuration information for the AX408 Fruit Crate Injection Molding Machine.

Download Brochure

 

Hot Tags: 408t fruit crate plastic injection moulding machine, China 408t fruit crate plastic injection moulding machine manufacturers, suppliers, factory, Plastic crate making machine, fruit crate plastic injection moulding machine, Plastic storage crate injection molding machine, 568T Fruit Crate Plastic Injection Moulding Machine, 408T Fruit Crate Plastic Injection Moulding Machine, Plastic crate injection molding machine

Send Inquiry

whatsapp

Phone

E-mail

Inquiry