Jan 12, 2026 Leave a message

Fruit Crate Injection Molding Machine Process

1. Mold Closure and Locking

The mold is installed on the moving and fixed mold plates of the injection molding machine. At the start of production, the locking mechanism of the injection molding machine pushes the moving mold plate, tightly closing the moving mold part with the fixed mold part, and applying sufficient locking force to resist the enormous pressure generated by the molten plastic on the mold during subsequent injection, preventing flash from forming on the product.

 

2. Injection and Holding Pressure

Plastic granules (usually polypropylene or high-density polyethylene, etc.) are added from the hopper and gradually melt into a viscous melt under the action of external heating and shear heat generated by the screw rotation inside the barrel. Driven by the screw, the melt is injected at high speed into the closed mold cavity through the nozzle and the mold's flow channel system. After the cavity is filled, the screw maintains a certain pressure for shrinkage compensation, i.e., the holding pressure stage, to compensate for the voids caused by the cooling shrinkage of the plastic, ensuring dimensional stability and a dense structure of the product.

 

3. Cooling and Shaping

The molten plastic circulates and cools within the mold cavity through the mold's cooling channels. Heat is carried away, and the plastic gradually solidifies from the surface inwards, forming the shape of a fruit basket. Cooling time is a crucial component of the entire production cycle, its duration depending on the properties of the plastic, the wall thickness of the product, and the efficiency of the cooling system.

 

4. Mold Opening and Ejection

After the product has fully cooled and solidified, the mold-locking mechanism moves the mold plate backward, opening the mold. Subsequently, the ejection mechanism of the injection molding machine (such as ejector pins or ejector plates) actuates, smoothly pushing the formed fruit basket out of the mold cavity, thus removing it from the mold.

 

5. Product Removal and Recycling

The ejected fruit basket is removed by a robot or manually and undergoes further processing, such as removing sprue. Afterward, the mold closes again, starting the next production cycle, and this cycle repeats continuously.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry