Horizontal injection molding machine maintenance: The injection screw, check ring, and barrel form the heart of the injection molding machine, determining the processing quality and efficiency. It is essential to keep them in good working condition. For horizontal injection molding machines, it is crucial to take necessary measures to prevent non-plastic debris from mixing into the plastic material stream. Furthermore, it is important to check the correct clearance between the screw and barrel, and between the check ring and barrel. A proper clearance should be sufficient to prevent plastic backflow and generate the shearing action required for plasticization. If slow melt flow, spots or black spots on the melt, or unstable product molding are observed, the wear of the screw, check ring, and barrel should be checked.
1. Insufficient hydraulic oil in the tank, air intake into the oil pump, or a clogged oil filter can all cause insufficient oil in the pump. This leads to air bubbles in the oil hitting the impeller and generating noise. The solution is to check the oil level, prevent air intake, and clean the oil filter.
2. High hydraulic oil viscosity increases flow resistance, requiring replacement with suitable hydraulic oil.
3. Noise caused by damage to the bearings or blades of the oil pump or motor, or misalignment of the coupling. Concentricity adjustment or replacement of parts is required.
4. Noise may occur if the directional valve is malfunctioning but still functional. This could be due to valve core wear, internal leakage, burrs causing blockage, or slow movement. Insufficient current in the solenoid valve can also cause noise. Solutions include cleaning the valve core, replacing a worn valve core, and ensuring a stable and sufficient current.
5. Noise is generated when hydraulic components are damaged or oil lines are blocked, causing high-speed hydraulic oil flow.
6. Mechanical malfunctions, such as worn bearings, insufficient lubrication, or loose parts, require identification and tightening or replacement of the affected parts.









